Makita ML702 Manual De Instrucciones página 5

For USA only
Recycling the Battery
The only way to dispose of a Makita battery is to recycle it. The law
prohibits any other method of disposal.
To recycle the battery:
1. Remove the battery from the tool.
2. a). Take the battery to your nearest Makita Factory Service Center
or
b). Take the battery to your nearest Makita Authorized Service Center or Distributor that has been
designated as a Makita battery recycling location.
• Call your nearest Makita Service Center or Distributor to determine the location that provides Makita
battery recycling. See your local Yellow Pages under ''Tools-Electric''.
OPERATING INSTRUCTIONS
Charging
For ML702 (Fig. 1), ML902 (Fig. 1) and ML901 (Fig. 2)
Charge the battery cartridge with the Makita charger before use. To remove the battery cartridge, pull out the set plate
on the torch/flashlight and grasp both sides of the cartridge while withdrawing it from the torch/flashlight. After charging,
insert the battery cartridge into the torch/flashlight and snap the set plate back into place.
For ML903 (Fig. 3)
Charge the battery cartridge with the Makita charger before use. To remove the battery cartridge, withdraw it from the
torch/flashlight while pressing the buttons on both sides of the cartridge. After charging, insert the battery cartridge into
the torch/flashlight all the way until it locks in place with a little click.
NOTE:
Battery cartridge 9100, 9102, 9100A and 9102A can be used on ML903 if you install the set plate. Install the set plate
on ML903 with the screw provided as shown in Fig. 4.
The following tables indicate the charging time and operating time on a single charge.
ML702
Voltage Battery cartridge
7.2 V
ML901/ML903
Voltage Battery cartridge
9100, 9100A, 9120
9102, 9102A, 9122
9.6 V
(Note)
If you use a power checking battery on Model ML901/ML903, the power checking battery will not indicate the remaining
battery capacity properly.
7000
7002
7033
9133
9134
9135, 9135A
Operating time
Approx. 140 min.
Approx. 210 min.
Approx. 240 min.
Operating time
Approx. 160 min.
Approx. 230 min.
Approx. 260 min.
Approx. 310 min.
Approx. 360 min.
Ni-Cd
Charger
DC7100, DC9710, DC9711,
DC1201, DC1411, DC1439,
DC1470, DC1422, DC1801
DC9711, DC1201, DC1411,
DC1439, DC1422, DC1801
DC9711, DC1411, DC1439,
DC1422, DC1801
Charger
DC9710, DC9711, DC1201,
DC1411, DC1439, DC1470,
DC1422, DC1801
DC9711, DC1201, DC1411,
DC1439, DC1422, DC1801
DC9711, DC1411, DC1439,
DC1422, DC1801
5