Speedboost ® Function; Autochef - Bosch NIT8668SUC Manual Del Usuario

Ocultar thumbs Ver también para NIT8668SUC:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Changing or deleting the time
Touch the Timer key repeatedly until the
lights up.
Change the time using number keys, or set
to delete the programmed time.
When the time has elapsed
A beep sounds.
appears on the timer display and the
‹‹
V
indicator lights up. The displays go out after
10 seconds.
When the Timer key is touched, the displays go out and
the beep stops.
SpeedBoost
function
®
The SpeedBoost
function can be used to heat large
®
amounts of water faster than by using heat level
Limitation on use
This function can always be activated for an element,
provided the other element in the same group is not in
use (see illustration). Otherwise,
display for the selected element; heat setting
be set automatically without activating the function.
Activation
Select an element.
1.
Touch the Speed Boost key.
2.
lights up on the display.
The function is activated.
Deactivation
Select the element on which SpeedBoost
1.
Touch the Speed Boost key.
2.
goes out on the display and the element switched
back to heat setting
Š
The function is deactivated.
Note: In certain circumstances, the function may be
deactivated automatically to protect the internal
electronic components of the cooktop.
14
indicator
V
in order
‹‹
and
will flash in the
Š
Š
will then
is set.
®
.

AutoChef

When you are using AutoChef
element, a sensor controls the temperature of the pan.
Advantages when frying
The element only heats up if this is required to
maintain the temperature. This saves energy and
prevents the oil or fat from overheating.
The AutoChef
pan has reached the optimum temperature for adding
oil and then for adding the food.
CAUTION
9
Never leave oil or fat cooking unattended.
.
Š
Place the pan in the centre of the element. Make
sure that the base of the pan has the proper
diameter.
Do not cover the pan with a lid. The automatic
regulation will not work. A mash splatter guard
can be used without affecting the automatic
regulation.
Only use fat or oil that is suitable for frying. When
you are using butter, margarine, olive oil or pork
lard, select the min temperature setting.
AutoChef
Suitable pans for AutoChef
Suitable frying pans for use with AutoChef
as optional accessory. Only use pans that are suitable for
use with AutoChef
specialized stores, or through our Technical Assistance
Service. Always indicate the related reference code.
HEZ390210 (Small)
HEZ390220 (Medium)
HEZ390230 (Large)
The frying pans have a non-stick coating, which means
that very little oil is needed for frying.
CAUTION
9
The AutoChef
type of frying pan.
Other frying pans may overheat. The temperature
can be set higher or lower. Try the lowest heat
setting first and then change it according to your
requirements.
Make sure that the diameter of the base of the
frying pan corresponds to the size of the element.
Place the pan in the centre of the element.
If a different type of pan is used, try it first at the
lowest frying level, adjusting it as required. The
pans may overheat.
®
to operate the heating
®
function reports when the empty frying
®
is not suitable for boiling.
®
®
. You can buy our system pans in
®
function was set especially for this
®
are available
®

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Nit8668uc

Tabla de contenido