Before Use - SOLAC TC5302 Instrucciones De Uso

trapped or tangled
Do not allow the power cord to hang or to come
•
into contact with the hot surfaces of the appli-
ance.
Check the state of the power cord. Damaged
•
or tangled cables increase the risk of electric
shock.
Do not touch the plug with wet hands.
•
Do not use the appliance if the cable or plug
•
is damaged.
If any of the appliance casings breaks, immedi-
•
ately disconnect the appliance from the mains
to prevent the possibility of an electric shock.
Do not use the appliance if it has fallen on the
•
floor, if there are visible signs of damage or if
it has a leak
The appliance is not suitable for outdoor use.
•
Keep the working area clean and well lit. Clut-
•
tered and dark areas invite accidents.
Do not place the appliance on hot surfaces,
•
such as cooking plates, gas burners, ovens or
similar.
Place the appliance on a horizontal, flat, stable
•
surface, suitable for withstanding high temper-
atures and away from other heat sources and
contact with water.
WARNING: In order to prevent overheating do
•
not cover the appliance.
USE AND CARE:
Fully unroll the appliance's power cable before
•
each use.
Do not use the appliance if the tray is not prop-
•
erly fitted underneath the heating element.
Do not use the appliance if the on/off switch
•
does not work.
Do not move or transport the appliance while
•
in use.
Do not turn the appliance over while it is in use
•
or connected to the mains.
Disconnect the appliance from the mains when
•
not in use and before undertaking any cleaning
task.
Store this appliance out of reach of children
•
and/or persons with physical, sensory or re-
duced mental or lack of experience and knowl-
edge.
Do not store the appliance if it is still hot.
•
Never leave the appliance connected and un-
•
attended if is not in use. This saves energy and
prolongs the life of the appliance.
SERVICE
:
Any misuse or failure to follow the instructions
•
for use renders the guarantee and the manu-
facturer's liability null and void.
INSTRUCTIONS FOR USE

BEFORE USE:

Make sure that all the product's packaging has
•
been removed.
This appliance is designed to toast and heat
•
bread. Do not use it to cook any other food.
Install the crumb tray correctly. Never use the
•
toaster without having correctly installed the
crumb tray
Before using this product for the first time, it is
•
advisable to test it without bread. It's normal for
it to give off a bit smoke at starting
Some parts of the appliance have been lightly
•
greased. Consequently, the first time the appli-
ance is used a light smoke may be detected.
After a short time, this smoke will disappear.
USE:
1. Plug it into the mains.
•
2 Put slices of bread on the toaster grill (4).
•
DO NOT spread oil or butter on slices of bread
•
before toasting.
DO NOT cover the toaster grill completely with
•
bread. Leave spaces between slices.
3. Select the toasting time by turning the knob
•
(5) (maximum time: 5.5 minutes). The toasting
time depends on the type of bread (frozen, dry
or day) and its thickness.
4. The Control knob (5) acts as a switch at the
•
same time. While it is heating, the pilot light will
be illuminated 5 Turn the slice of bread over
manually when it is toasted on one side.
6 The toasting process will end automatically
•
at the end of the toasting time,
7. If you want to stop it beforehand, either set
•
the regulator to 0, or unplug the power cord
8. Even if you unplug it from the main, the
•
toasting time control (5) will continue rotating
until you reach the end of its path
ONCE YOU HAVE FINISHED USING THE AP-
PLIANCE:
Unplug the appliance from the mains.
•
Collect the cable
•
Clean the appliance.
•
Cable compartment
•
This appliance has a cable compartment situ-
•
EN