Ce Marking; Compliance With The Emc Directive; Compliance With En 61800-3 (2004); Applicable Standards - ABB ACS355 Serie Manual De Instrucciones

Disposal

Applicable standards

• IEC/EN 61800-5-1: 2003
• EN 60204-1: 2006
• IEC/EN 61800-3: 2004
• EN 61800-5-2: 2007
• IEC 60529: 1989 +
Amendment A1: 1999
EN 60529: 1991 +
Amendment A1: 2000
• UL 508C
• DIN40050-9: 1993
• EN 62061: 2005
• EN ISO 13849-1: 2006
• IEC 61508: 2000

CE marking

A CE mark is attached to the drive to verify that the drive follows the provisions of the European Low
Voltage Directive (2006/95/EC) and EMC Directive (2004/108EC).

Compliance with the EMC Directive

The EMC Directive defines the requirements for immunity and emissions of electrical equipment used
within the European Union. The EMC product standard [EN 61800-3 (2004)] covers requirements
stated for drives.

Compliance with EN 61800-3 (2004)

See page 57.
The drive contains raw materials that should be recycled to preserve energy and natural
resources. The package materials are environmentally compatible and recyclable. All
metal parts can be recycled. The plastic parts can either be recycled or burned under
controlled circumstances, according to local regulations. Most recyclable parts are marked
with recycling marks.
If recycling is not feasible, all parts excluding electrolytic capacitors and printed circuit
boards can be landfilled. The DC capacitors contain electrolyte, which is classified as
hazardous waste within the EU. They must be removed and handled according to local
regulations.
For further information on environmental aspects and more detailed recycling instructions,
please contact your local ABB distributor.
The drive complies with the following standards:
Electrical, thermal and functional safety requirements for adjustable frequency a.c. power
drives
Safety of machinery: Electrical equipment of machines. Part 1: General requirements.
Provisions for compliance: The final assembler of the machine is responsible for installing
- an emergency-stop device
- a supply disconnecting device.
Adjustable speed electrical power drive systems. Part 3: EMC requirements and specific
test methods
Adjustable speed electrical power drive systems. Part 5-2: Safety requirements.
Functional.
Degrees of protection provided by enclosures (IP Code)
UL Standard for Safety, Power Conversion Equipment, third edition
Road vehicles; degrees of protection (IP69K); protection against foreign objects; water
and contact; electrical equipment
Safety of machinery. Functional safety of safety-related electrical, electronic and
programmable electronic control systems.
Safety of machinery. Safety-related parts of control systems. Part 1: General principles for
design.
Functional safety of electrical/electronic/programmable electronic safety-related systems.
55
Technical data