Product Set-Up - D-Link DCS-2130 Guia De Instalacion

PrODUCT
SET-UP
CD set-uP WiZarD
aDVaNCeD set-uP (aCCess Via iP aDDress)
To configure DCS-2130 using a static IP, connect your DCS-2130 directly to your computer's
ethernet port using the ethernet cable provided. Ensure that your computer is also set to a static IP
of address of type 192.168.0.x. Then connect the power cable on the DCS-2130. The DCS-2130
power light will display as solid red first, then shortly turn to green.
Then simply open a browser window and enter the IP address in the browser address field:
DCs-2130
SET-UP WIZArD CD
The CD contains all of the instructions required to set-up DCS-2130
INSErT CD
Insert the CD into the CD drive of your computer. The set-up
wizard should start automatically. Make sure that your internet
connection is active. (Do not plug in DCS-2130 yet)
SET-UP WIZArD
Select your language from the list of options and follow the
steps within the wizard to complete the set-up of DCS-2130
IP ADDRESS: http://192.168.0.20
USERNAME: admin
PASSWORD:
3