Digital Output; S Ele C T In G Inp Uts - NAIM SUPERUNITI Guia De Inicio Rapido

SuperUniti Quick Start Guide
2 S w it c hi ng on a nd G ett ing St art ed
• Once all connections have been made, switch on SuperUniti using the rear panel
mains switch . SuperUniti will display a welcome screen and select its
Note:
If SuperUniti is left unused its display will switch off after a preset time. The "Auto-off" time
can be adjusted within the setup menus.
• The SuperUniti display language can be changed. Enter setup mode by pressing the
handset ( ) key, select the language option and use the handset
setup
and ( ) keys to select the desired language. Press the
down 6
selection. Leave setup mode by pressing the
• SuperUniti is configured when shipped to connect to wired
automatically. However, if your SuperUniti has been previously used and its network
configuration altered, or your router requires nonstandard settings, it may not be able
to do so. Refer to the Reference Manual if this appears to be the case.
If a wireless network connection is to be used, SuperUniti will require configuration to
join the network. Press the handset
select the Network Settings
the Reference Manual for more information if necessary.
• If a subwoofer or external power amplifier is to be used, the SuperUniti
outputs must be configured from the
) key and select Speakers
amplifier is to be used. Select
subwoofer or an additional external amplifier are to be used. Select
the SuperUniti internal amplifier is to be used.
• If SuperUniti is to be used with an external DAC, the SuperUniti digital output must
be activated from the
select the

digital output

• To adjust SuperUniti volume use either the front panel
and keys. The numeric volume value is shown in the top left corner of the
vol- vol+
SuperUniti display.

3 S ele c t in g Inp uts

• SuperUniti inputs can be selected by pressing the front panel
( ) and ( ) keys or one of the handset
up 5 down 6
• Pressing one of the handset
through a group of inputs. For example, pressing the
while pressing the
radio
inputs. The default input selection key assignments are described in the Reference
Manual. To modify the key assignments press the handset
the Handset Buttons option.
• When SuperUniti is connected to a network with high speed internet access it will
automatically download a list of available internet radio stations. When the
input is subsequently selected, a menu will be displayed that lists all the available
stations sorted by location and genre. Use the handset
ok/list keys to browse the list and select stations.
Full Superuniti installation and operational information can be found in the reference manual
exit
setup ( ) key once SuperUniti is switched on and
option to configure the SuperUniti wireless settings. Refer to
Speakers setup menu. Press the handset
followed by Amp Used
all outputs if the SuperUniti internal amplifier and a
setup menu. Press the handset
digital output
option.
keys either selects a single input or scrolls
input selection
key scrolls through a group comprising the
available on line at www.naimaudio.com
Analogue 1
up
key to confirm the
ok/list
key.
TCP/IP networks
Preamp
. Select External if an external power
internal only
(
setup
or the handset
volume control
button, the handset
input
keys.
input selection
key selects the
PC UPnP
Fm, daB
setup ( ) key then select
up ( 5 ), down ( 6 ), left
input.
Setup
( )
5
4Language
Inputs
Speakers
Headphones
Network Settings
4Name:
Wireless:
Status: Not Connected
DHCP:
and Sub
Speakers
setup (
4Amp Used: Internal Only
Max. Volume:
Balance:
if only
) key and
Note:
The n-Stream app,
available from the iTunes App
Store, enables wireless touch
screen control of SuperUniti
from an iPhone or iPod touch.
Inputs On: radio
input,
41. FM
and
iRadio
2. DAB
3. iRadio
4. Unassigned
Internet Radio
iRadio
Added stations
Naim's Choice
4Location
( 3 ) and
Genre
English
1/9
1/5
Super-C2E6
Not Used
Yes
1/3
100
0
1/4
3/8