General Power Tool Safety Warnings - Makita DHR164 Manual De Instrucciones

ENGLISH
(Original instructions)
1 Red indicator
2 Button
3 Battery cartridge
4 Star marking
5 Indicator lamps
6 Check button
7 Switch trigger
8 Lamp
9 Reversing switch lever
10 Lock button
11 Rotation with hammering
12 Action mode changing knob
SPECIFICATIONS
Model
Concrete
Capacities
No load speed
Blows per minute
Overall length
Rated voltage
Battery cartridge
Net weight
• Due to our continuing program of research and
development, the specifications herein are subject to
change without notice.
• Specifications and battery cartridge may differ from
country to country.
• Weight, with battery cartridge, according to EPTA-
Procedure 01/2003
Intended use
The tool is intended for hammer drilling and drilling in
brick, concrete and stone.
It is also suitable for drilling without impact in wood,
metal, ceramic and plastic.

General Power Tool Safety Warnings

WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and instructions for future
reference.
Explanation of general view
13 Rotation only
14 Grip base
15 Side grip
16 Loosen
17 Tighten
18 Teeth
19 Protrusion
20 Bit shank
21 Bit grease
22 Bit
23 Chuck cover
24 Depth gauge
Steel
Wood
BL1415N
2.2 kg
DHR164
16 mm
13 mm
24 mm
0 – 1,600 min
0 – 5,300
297 mm
D.C. 14.4 V
BL1430/BL1430B/
BL1440/BL1450/
BL1460B
2.4 kg
CORDLESS ROTARY HAMMER SAFETY
WARNINGS
1. Wear ear protectors. Exposure to noise can cause
hearing loss.
2. Use auxiliary handle(s), if supplied with the tool.
Loss of control can cause personal injury.
ENE042-1
3. Hold power tools by insulated gripping surfaces,
when performing an operation where the cutting
accessory may contact hidden wiring. Cutting
accessory contacting a "live" wire may make
exposed metal parts of the power tool "live" and
could give the operator an electric shock.
4. Wear a hard hat (safety helmet), safety glasses
GEA010-1
and/or face shield. Ordinary eye or sun glasses
are NOT safety glasses. It is also highly
recommended that you wear a dust mask and
thickly padded gloves.
5. Be sure the bit is secured in place before
operation.
6. Under normal operation, the tool is designed to
produce vibration. The screws can come loose
easily, causing a breakdown or accident. Check
tightness of screws carefully before operation.
25 Dust cup
26 Blow-out bulb
27 Chuck adapter
28 Keyless drill chuck
29 Sleeve
30 Ring
31 Limit mark
32 Holder cap cover
33 Recessed part
34 Brush holdre cap
35 Screwdriver
DHR165
–1
D.C. 18 V
BL1830/BL1830B/
BL1815N/ BL1840/BL1840B/
BL1820/BL1820B BL1850/BL1850B/
2.2 kg
BL1860B
2.5 kg
GEB046-2
5