Installation
Instructions
If you have questions, call 800.GE.CARES (800.432.2737) or visit our Website at: ge.com
BEFORE YOU BEGIN
Read these instructions completely and
carefully.
IMPORTANT –
•
instructions for local inspector's use.
IMPORTANT –
•
governing codes and ordinances.
• Note to Installer – Be sure to leave these
instructions with the Consumer.
• Note to Consumer – Keep these
instructions for future reference.
• Unless very knowledgeable in the
installation of this product, engage a
professional installer.
• Proper installation is the responsibility of
the installer.
• Product failure due to improper installation
is not covered under the Warranty.
WARNING –
installation, switch power off at the service
panel and lock the service disconnecting
means to prevent power from being
switched on accidentally. When the service
disconnecting means cannot be locked,
securely fasten a prominent warning
device, such as a tag, to the service panel.
Save these
Observe all
Before beginning the
Radiant
Downdraft Cooktop
IMPORTANT SAFETY
INSTRUCTIONS
WARNING –
OF FIRE, ELECTRIC SHOCK OR INJURY TO
PERSONS, OBSERVE THE FOLLOWING:
A
Installation work and electrical wiring
must be done by qualified person(s) in
accordance with all applicable codes
and standards, including fire-rated
construction.
B
Sufficient air is needed for proper
combustion and exhausting of gases
through the flue (chimney) of fuel
burning equipment to prevent back
drafting. Follow the heating equipment
manufacturer's guidelines and safety
standards such as those published by
the National Fire Protection Association
(NFPA), and the American Society for
Heating, Refrigeration and Air
Conditioning Engineers (ASHRAE),
and the local code authorities.
C
When cutting or drilling into wall or
ceiling, do not damage electrical wiring
and other hidden utilities.
D
Ducted fans must always be vented to
the outdoors.
• This unit must be properly grounded.
WARNING –
OF FIRE, USE ONLY METAL DUCTWORK.
13
TO REDUCE THE RISK
TO REDUCE THE RISK