Display - LG DLEX9000 Serie Manual Del Usuario

Display

The display shows the settings, estimated time remaining, options, and status messages for your dryer.
When the dryer is turned on, the light in the display will illuminate.
WARNING :
To reduce the risk of fire, electric shock, or injury to persons, read this entire manual,
including the Important Safety Instructions, before operating this dryer.
- When the Hold to Start button is pressed, the dryer will display the estimated
(SENSOR DRY) or set time (TIME DRY) remaining, and begin tumbling.
The cycle time on SENSOR DRY cycles may fluctuate as the dryer
recalculates drying time for optimal results
- This portion of the display shows which stage of the drying cycle is currently
underway (CLEAN FILTER, DRY, or COOL).
disabled except the POWER button. This prevents children from changing settings
while the dryer is operating
- The display will show CLEAN FILTER when the dryer is turned on as a reminder to
clean the lint filter. It turns off when the Hold to Start button is pressed.
- If you have a special combination of settings that you use frequently, you can
save these settings as a CUSTOM PROGRAM.
- The FLOW SENSE™ duct blockage sensing system detects and alerts you to
blockages in the ductwork that reduce exhaust flow from the dryer. This improves
operating efficiency and helps minimize service calls, saving you money.
- When the appliance is connected to the internet through a home Wi-Fi network,
this indicator appears.
PRODUCT OVERVIEW
13