Back Panel; Installing Your Combo Drive - Dynex DX-CMBOSLM Guia Del Usuario

DX-CMBOSLM.fm Page 3 Wednesday, June 29, 2005 11:16 AM

Installing your combo drive

Back panel

DC jack Mini USB 2.0
port
Feature Description
DC jack Plug the supplied power cord into this
jack. Make sure that you use the power
cord that came with your combo drive.
Mini USB 2.0 Plug one end of the USB 2.0 cable into
port this port, then plug the other end of
the cable into a USB port on your PC.
Installing your combo drive
Connecting your combo drive
To install the CD-RW/DVD combo drive:
1 Connect the power adapter to the combo drive.
2 Attach the USB 2.0 cable to the mini USB 2.0 port on the back of
the combo drive.
3 Attach the other end of the USB 2.0 cable to the USB port in your
PC. The combo drive is now ready to use.
Your PC must have a USB 2.0 port to reach the drive's top speed.
You may experience slower USB 2.0 drive performance if it is
connected to USB 1.1.
Note:
• Make sure that you use the USB 2.0 cable and the power adapter
that came with your combo drive.
• Never plug in or unplug any other USB device while the combo
drive is transferring data. You may lose data.
• Don't disconnect the combo drive or unplug the power to the drive
while a CD is inserted.
• Don't connect more than two CD-RW drives to USB ports in a
single PC.
Installing the driver in Windows 98
Your combo drive is a PnP (Plug and Play) device. This means that
Windows XP, Windows 2000, and Windows ME will automatically detect
the drive and install the appropriate driver. If you are running
Windows 98SE, you need to install the driver from the CD that came with
your combo drive.
To install the driver in Windows 98SE:
1 After you connect your combo drive, turn on your PC.
Your PC automatically detects the drive, and the Add New
Hardware Wizard opens.
2 Click .
Next
3 Click
Search for the best driver for your device
3
, then click .
Next