Torin BIG RED TY30028 Manual Del Propietário página 18

TROUBLESHOOTING
RAM RAM BLEEDS
WILL NOT OFF AFTER
PRESS PRESS
LOAD OPERATION
X X
X
X X
X
X
Safe Operating Temperature is between 40°F – 105°F (4°C - 41°C)
RAM WILL NOT
RETRACT POOR LIFT
AFTER PERFORMANCE
UNLOADING
X
X
RAM WILL
NOT EXTEND
TO FULL
EXTENSION
X
X
X
X
X X
18
CAUSES AND SOLUTIONS
Release valve not tightly closed.
Ensure release valve tightly closed.
Overload condition.
Remedy overload condition.
Power unit malfunctioning.
Replace the power unit.
Reservoir overfilled.
Remove pump, then drain fluid to
proper level.
Linkage binding.
Clean and lubricate moving parts.
Fluid level low.
Ensure proper fluid level.
Air trapped in system.
Purge air from system.