Descargar Imprimir esta página

Craftsman 919.167810 El Manual Del Propietario página 15

Ocultar thumbs Ver también para 919.167810:

Publicidad

Idiomas disponibles

Idiomas disponibles

7.
Check all air line fittings and con-
nections/piping
for air leaks by
applying a soap solution. Correct
if necessary. NOTE: Minor leaks
can cause the air compressor to
overwork, resulting in premature
breakdown or inadequate perfor-
mance.
8.
Check for excessive vibration.
Readjust or shim air compressor
feet, if necessary.
9.
After 20 minutes, close the globe
valve. The air receiver will fill to
"cut-out"
pressure and the motor
will stop.
Before
Each Start-Up:
1.
Place On/Auto/Off
lever to "Off".
2.
Close the globe valve.
3.
Attach hose and accessories.
_Risk
of unsafe
operation. Firmly
grasp air hose in hand when
installing or disconnecting
to
prevent hose whip.
Risk of unsafe
'
"--
operation.
Do not
use damaged
or worn accessories.
NOTE: A regulator MUST be installed
when using accessories rated at less
than 175 PSI.
NOTE: The hose or accessory will
require a quick connect plug if the air
outlet is equipped with a quick con-
nect socket.
_Risk
of Bursting.
--
Too much air
pressure
causes a hazardous
risk of
bursting.
Check the manufacturer's
maximum pressure rating for air
tools and accessories.
The regulator
outlet pressure
must never exceed
the maximum pressure rating.
_Risk
of unsafe
operation.
Compressed
air from the unit may
contain water condensation
and
oil mist. Do not spray unfiltered
air
at an item that could be damaged
by moisture.
Some air tools and
accessories
may require filtered
air. Read the instructions for the air
tools and accessories.
How to Start:
1.
Turn the On/Auto/Off
lever to "On/
Auto" and allow tank pressure to
build. Motor will stop when tank
pressure reaches "cut-out" pres-
sure.
2.
When the tank pressure reaches
"cut-out" pressure open the globe
valve.
iMPORTANT." When using regula-
tor and other accessories refer to the
manufacturers
instructions.
if any unusual
_
"__
noise or vibration
is noticed, stop the compressor
immediately
and have it checked
by
a trained
service technician.
The compressor
is ready for use.
15-ENG
1000002023

Publicidad

loading