Symbols On The Power Tool; Contents; Overview - Flex CSM 4060 Manual De Instrucciones

Portable circular saw for metals CSM 4060

Contents

Contents . . . . . . . . . . . . . . . . . . . . . . . . 15
Overview . . . . . . . . . . . . . . . . . . . . . . . . 15
Technical specifications . . . . . . . . . . . . 16
Safe operating practices . . . . . . . . . . . . 16
Noise and Vibration . . . . . . . . . . . . . . . . 18
Operating instructions . . . . . . . . . . . . . . 19
Maintenance and care . . . . . . . . . . . . . . 21
Disposal information . . . . . . . . . . . . . . . 22
-Declaration of Conformity . . . . . . . . 23
Exemption from liability . . . . . . . . . . . . . 23
Symbols used in this manual
Danger!
Denotes impending danger. Non-
observance of this warning may result
in death or extremely severe injuries.
Caution!
Denotes a possibly dangerous situation.
Non-observance of this warning may result
in slight injury or damage to property.
Note
Denotes application tips and important
information.

Symbols on the power tool

Before switching on the power
tool, read the operating manual!
Wear goggles!
Disposal information for the old
appliance (see Page 25)!

Overview

1 Handle
2 Overload protection reset button
3 Starting lockout
4 Safety switch
5 Rating plate (on underside of motor)
6 Hand grip
7 Allen screw
for attachment of sawdust guard
8 Wing screw
for attachment of parallel stop
9 Spindle lock
for locking the spindle when changing
the tool
10 Clamping lever
for adjusting the cutting depth
11 Base plate
12 Window
13 Wing screw
for attaching the sawdust guard and
sawdust guard cover
14 Sawdust guard cover
15 Sawdust guard
for catching the sawdust
16 Cover screws for carbon brushes
17 Sighting groove
for guiding the power tool along
a scored line
18 Parallel stop
19 Pendulum guard
20 Saw blade attachment
a Locking screw
b Front clamping flange
c Rear clamping flange
21 Power cord with plug
15