Steren INV-300 Manual De Instrucciones página 20

1.- ON/OFF power switch: This switch turns on/off the inverter.
2.- Power indicator: When lit, it indicates the inverter has been turned on, and is ready for
use.
3.- Surge indicator: Turns on when the inverter protection operates.
4.- Dual AC outlets: Allows you to connect up to 2 different devices.
5.- Battery connections posts: Allows you to connect the inverter to the battery, using the
included alligators clips.
6.- High speed cooling fan: This fan cool the internal circuits, while the inverter is in use.
7.- Ground connector (INV-1000 and INV-1500): Allows you to ground the inverter.
8.- USB port: Use to connect any device that has USB power feed.
9.- Fuse: Prevents damage to the connected equipment to get an electric shock.
Even in OFF position, the inverter consumes a low level of power from the battery.
Make sure do not overload the maximum inverter voltage capacity (300, 400, 600, 1000, for 1500 W,
depending on the model).
Pay attention to polarity when plug the alligators to the battery. Red terminal is positive (+) and black
terminal is negative (-).
20