High Voltage Protection; Troubleshooting - Steren INV-300 Manual De Instrucciones

High voltage protection

The inverter will automatically turn off when the DC voltage is above the required amount.
The input voltage range is 11 to 14 volts.
When the DC voltage is above 14 volts, the inverter will automatically turn off.
- Overcharge protection:
The inverter will automatically turn off when the input charge is higher than the required
amount.
- Short-circuit protection:
The inverter will automatically turn off when a short-circuit occurs.
- Temperature protection:
The temperature will become too high for the inverter when it is in use for an extended period
of time or when it is not well ventilated.
The inverter will automatically turn off when the temperature reaches 65°C. If you need to
use the inverter for an extended period of time, the charge needs to be 80% of the average.
Also, make sure the inverter is well ventilated.

TROUBLESHOOTING

Buzz in audio systems while the
inverter is in use
TV interference while the
inverter is in use
No Output Voltage
24
TROUBLE SOLUTION
Try to buy a high quality AC in-line filter.
Adjust the monitor and the antenna.
- Check all connections.
- Protection mode.