Publicidad
Idiomas disponibles
Idiomas disponibles
Attach the right angle sash lock as shown below.
2.
Step 8:
Installing the Chassis into the Cabinet
Team lift (with 2 people) the air conditioner chassis and carefully slide it into the cabinet. Let
1.
the front of the air conditioner hang out approximately 6 inches.
CAUTION! Do not push on the CONTROLS OR FINNED COILS!
2.
Be sure the chassis is firmly seated in the back of the cabinet.
3.
Insert all screws removed during the window installation and reattach the front face plate,
4.
front panel, and the air filter.
For through the wall installation, please refer to the online user manual.
How to Control Your AC
All the basics you need to know to stay cool!
Power – turn the air conditioner on and off.
1.
Buttons – use these buttons on
2.
and
the control panel or remote control to increase
or decrease the desired temperature, or time
using the Timer. The temperature range is:
61°-88° Fahrenheit, or 16°-31° Celsius.
Display – By pressing the Display button on
3.
the remote, it can switch off/on all lights and
LED Display. When the timer is not in use, the
operation mode and the set temperature will
be displayed. Time will be displayed under the
timer setting.
Modes – Press the mode button on the control panel to cycle and select a MODE, or select a
4.
MODE by pressing the desired button the remote.
• Auto Mode – press the MODE button on the panel or the Auto Mode button on the
remote - In AUTO mode the unit automatically chooses the mode of operation (COOL, DRY
or FAN). In this mode the temperature will be set according to the room temperature
(tested by the temperature sensor which is incorporated in the indoor unit.).
Sash Lock
5/8" Long
Hex-Head Screw
10
Publicidad
