Basic Functions - Trevi XR 400 APP Manual Para El Uso Y La Conexión

ENGLISH
SUPPLY
This unit works with 12V 4Ah lead-acid rechargeable battery and 100-240V ~ 50 / 60Hz mains power supply.
When the battery is running out or the unit does not turn on, plug the power cord into the socket (19) on the device and plug into
a power outlet to charge.
CHARGE LED lights status:
- RED CHARGE lamp: the device is connected to the power cable and the battery is charging.
- CHARGE GREEN LED light: charging operation completed, the battery is charged.
- RED CHARGE lamp flashing: when the device is in use, it indicates that the battery is running out and needs to be recharged.
Do not connect the appliance to electrical outlets other than those indicated.

BASIC FUNCTIONS

ON / OFF
Press the power switch (20) and turn it to the ON / OFF position to turn the appliance on / off.
NOTE: After about 15 minutes of inactivity, the unit will automatically switch to standby mode.
To turn the unit on again, press the FUNC / STANDBY / LIGHT button (7) or turn the ignition switch (20).
In case of abnormal operation of the appliance, switch off the appliance, unplug the power cord and wait a few minutes before
plugging it back in and switching the appliance on.
FUNCTION MODE SETTING
To change the operating mode, press the FUNC / STANDBY / LIGHT button (7) several times to select USB / AUX / RADIO /
BLUETOOTH (BT appears on the display).
VOLUME ADJUSTMENT
Press the Volume - (5) or Volume + (6) keys to adjust the volume.
EQUALIZER
This unit has an integrated audio equalization system. Press the EQ button (1) to select a setting that best suits the current sound
reproduction. It is possible to choose between FLAT, POP , CLASSIC, JAZZ, ROCK equalizations.
DISC-LIGHT EFFECTS
Long press the FUNC / STANDBY / LIGHT button (7) to activate the Disco-Light effects. You can choose from nine different
effects.
To deactivate the Disco-Light effect, press and hold the FUNC / STANDBY / LIGHT (7) button repeatedly until the display shows
"OFF".
USB CHARGE OUTPUT
It is possible to use the USB CHARGE (11) socket to charge external USB devices.
Note1: it is not possible to use this socket to play audio files from external devices (use the USB input, see chapter USB INPUT).
FM RADIO
1. Press the FUNC / STANDBY / LIGHT button (7) on the unit and select the radio function (the display shows the tuned frequency
and FM indication).
2. Hold down the / / BT / SCAN key (4) for a few seconds to search and store radio stations automatically; the search /
memorization will stop at the completion of the entire radio band scan or the filling of all the available memories. It is possible
to memorize up to a maximum of 30 radio stations. At the end, the first stored radio station will be played.
3. To recall a stored station use the keys (3) to go to the next station, or (2) to go to the previous station.
4. Hold down for a few seconds the keys (3) or (2) on the unit to tune to the next or previous radio station with the best signal received.
5. To store a radio station:
- Go to the frequency to be memorized, long press the EQ / P .MODE key (1).
- Using the keys (3) or (2) select the memory number where you want to save the radio station.
- Long press the EQ / P .MODE button (1) to confirm.
- The unit can store up to 30 stations.
6. The ST indication on the display indicates the reception of the stereo signal.
Note: FM reception depends very much on the location of the device.
The proximity of TV sets, neon lamps or other domestic appliances may cause disturbances in the reception of radio programs,
in this case
9
XR 400 APP