Measuring Volume - DeWalt DW0165 Manual Del Usuario

4.
Select as the measurement type.
• Press to display the Main Menu
(Figure ).
E 2
• Press to select
• Press to display the Measurement Type
Menu (Figure
E 3
• Press the arrow buttons to select
• Press .
5. Press to add, or
two walls, floors, or objects.
6. Measure the width of the first wall, floor, or object
(Figure ).
M 1
• Position the tool at one end of the wall, floor,
or object and point the laser dot across the
width. (Figure
M 1
the tool if you are measuring from the bottom
of the tool.)
• Press to display the width measurement
at the top of the screen.
7. Measure the length of the first wall, floor, or
object (Figure
M 2
• Position the tool at one end of the wall, floor,
or object and point the laser dot across the
length. (Figure
M 2
the tool if you are measuring from the bottom
of the tool.)
• Press to display the length measurement
on the second line of the screen.
8. Follow the same steps to measure the width and
length of the second wall, floor, or object.
9. View the Area measurement at the bottom of the
screen (Figure
M 3

Measuring Volume

You can measure the volume of a room or object
(Figure ).
N
1. Point the tool's laser (Figure
or object, and not toward anyone's eyes.
2.
Press (Figure
3. Make sure the tool position setting (Figure
is correct for taking the measurement.
.
).
.
to subtract, the areas of
shows where to position
).
shows where to position
).
) toward a wall
A 1
) to turn the tool on.
A 3
C 4
4. Select as the measurement type.
• Press to display the Main Menu
(Figure
E 2
• Press to select
• Press
Menu (Figure
• Press the arrow buttons to select
• Press .
5. Measure the width (Figure
• Point the top of the tool at one side of the target
(room or object).
• Position the tool at one end of the target and
point the laser dot across the width.
(Figure
N 1
tool if you are measuring from the bottom of
the tool.)
• Press
at the top of the screen.
6.
Measure the length (Figure
• Position the tool at one end of the target and
point the laser dot across the length.
(Figure
N 2
tool if you are measuring from the bottom of
the tool.)
• Press
on the second line of the screen.
7 Measure the height (Figure
• Position the tool at one end of the target and
point the laser dot across the height. (Figure
shows where to position the tool if you are
3
measuring from the bottom of the tool).
• Press
on the third line of the screen.
8. View the Volume measurement at the bottom of
the screen (Figure
)
).
.
to display the Measurement Type
).
E 3
.
).
N 1
shows where to position the
to display the width measurement
).
N 2
shows where to position the
to display the length measurement
).
N 3
to display the height measurement
).
N 4
E
N
15