Publicidad
Idiomas disponibles
Idiomas disponibles
[] Attaching
the Stand
You must attach the stand to the unit to display upright. Be sure the front and rear of the stand match the proper direction.
1
Spread a thick and soft cloth over a
table.
Place the main unit face down onto it.
Make sure not to damage the screen.
At least two people are required at
this
_p.
2
Insert the stand all the way to the
main unit slowly until it clicks.
Make sure not to put the AC cord
between
the stand and the unit.
3
Drive Phillips pan screws in the 3
threaded
holes at the bottom
of the
stand with a screwdriver
tightly.
To Remove
the Stand from this Unit
Unscrew the Phillips pan screws indicated by"(1}", then lift the lever on the bottom
stand and remove the stand from the unit slowly. Be careful not to drop the stand
when you remove it.
lever_
Note:
• When attaching the stand, ensure that all screws are tightly fastened. If the stand is not properly attached, it could cause the unit to fall,
resulting in injuries as well asdamage to the unit.
•Make sure to use a table which can support the weight of this unit and is larger than this unit.
•Make sure the table is in a stable location.
[] Symbols
Used
in this Manual
The following
is the description
for the symbols used in this manual.
Description
refers to:
: Digital TV operation
: Analog TV operation
• If neither
symbol appears under the function
heading, operation
is applicable
to both.
[] Trademark
Information
• HDMI, the HDMI logo and High-Definition
Multimedia
Interface are trademarks
or registered trademarks
of HDMI
Licensing
LLC.
• Manufactured
under license from Dolby Laboratories."Dolby"and
the double-D
symbol are trademarks
of Dolby
Laboratories.
• Products that have earned ENERGY STAR®are designed to protect
the environment
through
superior energy efficiency.
EN
Publicidad
