Zircon Leak Alert WiFi Manual Del Usuario página 6

1
DEVICE
Wi-Fi
Choose Wi-Fi router
WPS
CBCI-799B-2.4
ZirconFrontConference
• ZirconCentral
• • • • • • • • • •
Show Characters
Zircon Front
Conference_Demo_Network
LPC
DOS_Ethernet1
3DMachineRoom
IMPORTANT: ROUTER RELIABILITY IS KEY. If your router is factory reset,
replaced, has its wireless password updated, or if a new configuration is entered,
the Leak Alert WiFi water detector must be reconfigured to the router. While The
™
Detector will still emit an audio and visual alert, it will be unable to send email
notifications. The Detector will chirp when disconnected from the router.
Set-Up Screen 2: DEVICE
Enter a name for your Leak Alert
WiFi water detector and enter
your local time. If you have
multiple Detectors, we recommend
naming them with The Detectors'
intended locations (i.e. kitchen sink,
water heater) – not to exceed
32 characters.
Email notifications will contain
The Detector name and time stamp.
Check the box by "SEND LOG
EVERY 6 DAYS" to receive an
optional event log summary every
6 days. The log reports the last
20 notifications sent, as well as
anytime there was a lost connection
to the router, once it is reconnected.
Press the "Next" arrow on the lower
right side of the screen.
192.168.4.1
2 3
CONTACT DONE
™
Select your router, enter password
(if applicable) and press the "Next"
arrow. You may need to
wait several seconds for this step
to complete.
"Next" Arrow
192.168.4.1
1 2
Wi-Fi CONTACT
DEVICE
Office
03:29 PM
SEND LOG EVERY 6 DAYS
3
DONE
"Next" Arrow
5