Smart Functions; Lg Smartthinq Application - LG LW1817IVSM Manual De Uso

18

SMART FUNCTIONS

SMART FUNCTIONS

LG SmartThinQ Application

The LG SmartThinQ application allows you
to communicate with the appliance using a
smartphone.
Before Using LG SmartThinQ
● For appliances with the
1
Use a smartphone to check the strength of
the wireless router (Wi-Fi network) near the
appliance.
● If the distance between the appliance and
the wireless router is too far, the signal
strength becomes weak. It may take a
long time to register or installation may
fail.
2
Turn off the Mobile data or Cellular Data
on your smartphone.
3
Connect your smartphone to the wireless
router.
NOTE
● To verify the Wi-Fi connection, check that Wi-Fi
● The appliance supports 2.4 GHz Wi-Fi networks
only. To check your network frequency, contact
your Internet service provider or refer to your
wireless router manual.
● LG SmartThinQ is not responsible for any
network connection problems or any faults,
malfunctions, or errors caused by network
logo
connection.
● The surrounding wireless environment can
make the wireless network service run slowly.
● If the appliance is having trouble connecting
to the Wi-Fi network, it may be too far from
the router. Purchase a Wi-Fi repeater (range
extender) to improve the Wi-Fi signal strength.
● The network connection may not work properly
depending on the Internet service provider.
● The Wi-Fi connection may not connect or may
be interrupted because of the home network
environment.
● If the appliance cannot be registered due to
problems with the wireless signal transmission,
unplug the appliance and wait about a minute
before trying again.
● If the firewall on your wireless router is enabled,
disable the firewall or add an exception to it.
● The wireless network name (SSID) should be a
combination of English letters and numbers. (Do
not use special characters.)
● Smartphone user interface (UI) may vary
depending on the mobile operating system (OS)
and the manufacturer.
● If the security protocol of the router is set to
WEP, network setup may fail. Change the
security protocol (WPA2 is recommended), and
register the product again.
icon on the control panel is lit.