Rear Panel; About The Three Modes; Preset Programs Mode (Recalling A Preset Program); Manual Mode - VOX Amplification VT100X Manual De Usuario

Rear Panel

a b
a . POWER switch
This switch turns the power on and off.
b . AC Power connector
Connect the included power cable here.
We recommend that you first connect the power cable to the VT100X,
and then connect the other end of the cable to an AC outlet.

About the three modes

Preset programs mode (recalling a preset program)

In preset programs mode, preset programs can be recalled with the
AMP MODELS knob. When this is selected, the various settings, for
example, for GAIN, TREBLE, MIDDLE, BASS, VOLUME and the effect,
will be automatically switched. Refer to the table at the end for the list of
songs programmed for each amp model.
Switching to preset programs mode
Press the PRESET PROGRAMS button once to enter preset programs
mode; the button will illuminate.
Recalling a preset program
While the PRESET PROGRAMS button is lit, turn the AMP MODELS
knob. Regardless of the positions of the knobs on the top panel, the
preset program set up for the selected amp model will be recalled.
In the preset programs mode, each press of the PRESET PROGRAMS
button switches the preset program in the following order: A, B, C. The
button lights up in green, yellow-green, red.

Manual mode

When the VT100X is in Manual mode, it will behave like a conventional
guitar amp. In this mode, the setting positions of all selectors and knobs
in the amp section are simply applied to the sound.
Switching to manual mode
Hold down the PRESET PROGRAMS button for at least one second to
switch to manual mode; the PRESET PROGRAMS, BANK and channel
buttons turn off.
When in manual mode, if a parameter (effect, noise reduction, valve
section setting, etc.) not set by a knob is changed, that setting is
automatically saved. That setting will be recalled the next time that
the manual mode is entered.

User program mode (recalling a user program)

In user program mode, the program saved in the channel of the bank,
which can be selected by pressing the BANK and channel buttons, is
recalled, and all amp and effect parameters are automatically switched to
the saved settings.
Switching to user program mode
Press the BANK button or a channel button to enter user program mode;
the BANK and channel buttons light up.
Recalling a user program
Press a channel button to switch the channel, and the program saved in the
channel is recalled. Press the BANK button to switch the bank, and the channel
with the same number as that selected in the previous bank is recalled.
If an optional (VOX VFS5) foot switch (sold separately) is connected
Tip
and being used, you can use your foot to switch the bank and channel.
For details, refer to "Using the foot switch (VOX VFS5)" on page 9.
- 7 -
VT100X Owner's manual