Front And Rear Speaker Placement - Bose LIFESTYLE DVD Guia De Instalacion

English Deutsch Español

Front and rear speaker placement

Bose offers a variety of speaker mounting accessories, including stands and wall brackets.
For more information, or to purchase accessories, contact your local Bose
www.Bose.com. To contact Bose directly, refer to the contact list provided in the carton.
CAUTION: Choose a stable and level surface for each speaker. Vibration can cause speakers to
move, particularly on smooth surfaces like marble, glass, or highly polished wood.
Front center speaker
Place the center speaker in an upright position on a stable and level surface directly above or
below the center of the TV screen or as close to that as possible.
OR
Front left and right speakers
Place one speaker to the left and one to the right of the TV.
OR
Rear left and right speakers
Place the speakers at the back of the room at ear height (when seated) or higher, if possible.
The longer the path from speakers to ears, the better.
Français Italiano Nederlands
• If possible, align the front of the speaker with the front edge of the TV screen.
• Make sure the 20 ft (6.1 m) front speaker cable can reach from the speaker to the
Acoustimass ® module.
• If you want to place the center speaker on the top of your TV, you can attach the
supplied rubber feet (or pad) to the bottom of the speaker to protect the surface of
your TV.
• Keep each speaker within 3 ft (1 m) of the TV screen to prevent too much
separation of the sound from the picture. Vary this distance to suit your room condi-
tions and personal preference.
• If any front speakers will be in a bookcase unit, be sure to position them at the front
edge of the shelf. Placing them farther back can change the tonal quality of the sound.
• Make sure the 20 ft (6.1 m) front speaker cables will reach from the speakers to the
Acoustimass module.
• Rotate the top and bottom cube of each speaker array so that they point in different
directions and toward a wall or other hard surface to create reflected sound. Refer to
"Hearing the results of proper placement" on page 11.
• Aim the speakers away from the listeners to prevent them from pinpointing the exact
location of the sound source, which is ideal.
• Make sure the 50 ft (15.2 m) rear speaker cables will reach from the speakers to the
Acoustimass module.
• Rotate the top and bottom cube of each speaker array so that they point in different
directions and toward a wall or other hard surface to create reflected sound. Refer to
"Hearing the results of proper placement" on page 11.
Svenska
S P
YSTEM LACEMENT
® dealer or visit
9