cascade corporation E Guía Del Operador página 2

C
OntEntS
Introduction
Safety Rules
Daily Inspection
Attachment Operation
Picking Up Loads
Safe Operation and Maintenance
OSHA Regulations
I
ntrODuctiOn
Single-Double Pallet Handler – The Cascade Multi-
Pallet Handler is designed to handle both single pallets or
two pallets side by side. The attachment has an integral
sideshifting function. These units are used for transport,
stacking, van trailer or boxcar loading and breakout.
About this Guide – The information in this guide is intended
to simplify operator understanding about effective and safe
attachment use and operation. Read this guide thoroughly
before operating the attachment. Be sure you know and
understand all operating procedures and safety precautions.
If you have any questions, or don't understand a procedure,
ask your supervisor.
Emphasize Safety! Most accidents are caused by operator
carelessness or misjudgement. You must watch for hazardous
situations and correct them.

1
WARNING: Rated capacity of the truck/at-
2
tachment combination is a responsibility of
the original truck manufacturer and may be
4
less than shown on the attachment name-
5
plate. Consult the truck nameplate.
5
WARNING: Do not operate this attachment
unless you are a trained and authorized lift
6
truck driver.
Backrests
Frame
Arm Bars
Inner Forks
Hydraulic
Cylinders
SD0549.eps
Outer Forks
630934-R EN