Using A Wall-Mount Bracket - Sony KDL-22BX320 Manual De Instrucciones

Using a Wall-Mount Bracket

Your TV can be mounted on a wall using a Wall-Mount Bracket (not supplied) out of the box as
packaged. Some larger size TV may require removing the Table-Top Stand; refer to the
instructions provided with the TV.
Prepare the TV for the Wall-Mount Bracket before making cable connections.
For product protection and safety reasons, Sony strongly recommends that you use the Wall-
Mount Bracket designed for your TV and the installation should be performed by a Sony
dealer or licensed contractor.
• Follow the instruction guide provided with the Wall-Mount Bracket for your model. Sufficient
expertise is required in installing this TV, especially to determine the strength of the wall for
withstanding the TV's weight.
• Be sure to use the screws supplied with the Wall-Mount Bracket when attaching the mounting
hooks to the TV set.
The supplied screws are designed as indicated by illustration when measured from the attaching
surface of the mounting hook.
The diameter and length of the screws differ depending on the Wall-mount bracket model. Use of
screws other than those supplied may result in internal damage to the TV set or cause it to fall,
etc.
Min. - 26 TV: 6.5-10 mm
32 TV - Max.: 8-12 mm
• Be sure to store the unused screws and Table-Top Stand in a safe place until you are ready to
attach the Table-Top Stand. Keep the screws away from small children.
• Read the supplied Safety Booklet for additional safety information.
Screw (supplied with the Wall-Mount Bracket)
Mounting Hook
Hook attachment on rear of TV set
45