HK Audio Lucas nano 300 Manual De Instrucciones página 6

Lucas Nano 300 1.0
3 Setups
You can set up LUCAS NANO 300 in various configurations:
Mono Mono
System 1 System 2
Note that the optionally available LUCAS NANO ADD-ON PACKAGE
affords you the greatest flexibility.
Contents: 1x 8m Link/Speaker cord, 1x 2m Link/Speaker cord, 2x height adjustable pole mount,
1x tripod leg, 4x cable ties, 1x bag
The following examples should help you find the best setup
for your application:
3.1 Mono System 1
Balance
Setup
L R
Speaker Out
L R
Stack and connect the LUCAS NANO 300 satellites as described in
section „1.3, Easy Click Connector". Then connect the two LUCAS
NANO 300 satellites to the LUCAS NANO 300 subwoofer. Be sure to set
the Setup switch to Mono (to the right).
6
Stereo Double Stereo System
System
(two Mono Systems)
L R
L
3.2 Mono System 2
Setup
Speaker Out
R
L
Stack and connect the LUCAS NANO 300 satellites as described in
section, „1.3 Easy-Click connector". Insert the adjustable speaker
pole (optional*) into the pole mount on the subwoofer and attach the
two satellites to it. Use a cord equipped with 1/4" (6.3 mm) jack plugs
(optional*) to connect the LUCAS NANO 300 subwoofer's Speaker Out
L to the LUCAS NANO 300 satellites. Be sure to set the Setup switch to
Mono (to the right).
3.3 Stereo System
Insert the adjustable speaker pole (optional*) into the pole mount on
the subwoofer and attach one LUCAS NANO 300 satellite to it. Attach
the second satellite to a tripod speaker pole (optional*). Use a cord
equipped with 1/4" (6.3 mm) jack plugs (optional*) to connect the
LUCAS NANO 300 subwoofer's Speaker Out L to the left LUCAS NANO
300 satellite. Then connect the Speaker Out to Satellite R port to the
right LUCAS NANO 300 satellite. Be sure to set the Setup switch to
Stereo (to the left).
3.4 Double Stereo System
(two LUCAS NANO 300 systems)
Setup
L
Speaker Out
L R
Stack and connect two each LUCAS NANO 300 satellites as described
in section „1.3 Easy-Click connector". Then insert an adjustable
speaker pole (optional*) into each subwoofer pole mount and attach
two satellites to each pole. Use cords equipped with 1/4" (6.3 mm) jack
plugs (optional*) to connect the LUCAS NANO 300 subwoofers' Speaker
Out L ports to the LUCAS NANO 300 satellites. Be sure to set the Setup
switch on both systems to Mono (to the right).
Use a cord equipped with stereo 1/4" (6.3 mm) jack plugs to connect
the two LUCAS NANO 300 subwoofers' Link In/Out ports and create a
stereo system. Be sure to adjust each side's Balance knob accordingly;
that is, turn one to the left and the other to the right.
You'll find examples of more applications for two combined LUCAS
NANO 300 systems, for example, to cover two rooms, in the appendix
starting on page 38.
*Included in the LUCAS NANO ADD-ON PACKAGE
Balance
L R
R
Balance
Setup
L R
Speaker Out
L R
Link
R
L R
Use
Stereo
Cable!
Setup
L R
Speaker Out
L R