Before First Use - Klarstein Lagoona Manual De Instrucciones

BEFORE FIRST USE

Dishwasher salt
• If your model does not have a salt container, you can skip this section. Always use
salt suitable for dishwashers. The salt container is located underneath the lower dish
compartment and should be filled as follows:
• Only use salt that is explicitly suitable for use in dishwashers. Any other type of salt,
especially table salt, will damage the container. Damage caused by the use of
inappropriate salt is not covered by the manufacturer's warranty.
• Fill the appliance into the container only before starting the dishwasher. This
prevents salt or salt water, which may have been spilled, from remaining on the
bottom of the dishwasher for a longer period of time and causing wear and tear.
Filling the rinsing salt container
1. Remove the basket and unscrew the reservoir cap.
2. Place the end of the funnel (supplied) into the hole and pour in about 1kg of
dishwasher salt.
3. Before first wash, fill the salt container to its maximum limit with water, It is normal
for a small amount of water to come out of the salt container.
4. After filling the container, screw back the cap tightly.
5. The salt warning light will stop being after the salt container has been filled with salt.
6. Immediately after filling the salt into the salt container, a washing program should
be started (We suggest to use a short program). Otherwise the filter system, pump
or other important parts of the machine may be damaged by salty water. This is out
of warranty.
EN
55