Bosch HEZCMT3050 Manual Del Usuario página 7

10. Set the Coffee Maker Transformer on top of the
Transformer Support Brackets.
11. Plug the transformer plug into the back of the coffee
maker, as instructed in the Coffee Maker Installation
Instructions. Slide coffee maker in cabinet on top of
the Base Plate and move coffee maker to the left so
the left side is flush with the Left Support Bracket.
12. Open the coffee maker door. Secure the Left Support
Bracket from the inside of the coffee maker using six
(6) x 1'' T-20 Torx head screws.
13. Use a 1'' T-20 Torx screw with spacer (shipped with
coffee maker) to secure the top right corner of the
coffee maker.
14. If the door does not shut smoothly, check to see if the
Door Latch is hitting on the top or bottom or the
receiver.
Page. 6