Eu/Us Selection Mode (Thermosunis) - SOMFY Sunis Indoor Wirefree RTS Guia De Instalacion

EU/US selection mode
Factory setting: US Mode
Changing the mode
• Place the mode selector to Mode 2
(1) or Mode 3 (2).
• Turn the sensor off (
• Press and hold the Mode button (3)
for approximately 2 seconds when
the sensor is turned on.
US EU sun LED changes from red to green
EU US sun LED changes from green to red
Caution: If a malfunction occurs during movement:
The receiver and sensor must be set to the same
mode: EU mode or US mode.
see installation guide for the receiver.
Caution: Sunis Indoor Wirefree RTS operation only in
mode 1
Copyright © 2008 Somfy SAS. All rights reserved.
(Thermosunis)
).
.
3
1 2
Page 15