b.
To Recall Settings from Memory
1. Press and hold [Set] key for 3 seconds while
power is off. The scale will recall the memories
(Recall mode).
2. In Recall mode, the screen displays the last
memory location, height, age, gender and/or last
measured weight BMI/BMI-for-age percentile on
the toggle screen sequentially after 3 seconds.
(Fig. 11)
3. Press [▲] or [▼] to select the memory location.
4. If the selected memory is free, no data will be
displayed. (Fig. 12)
5. If the selected memory is occupied, press [Set]
to confirm the desired memory.
be displayed on the screen. The screen then
displays the height, age and gender on the
toggle screen sequentially after 3 seconds. (Fig.
13) A "beep" sound indicates successful setting.
6. Step onto the scale and stand still while the
weight is computed.
7. The screen will display the present weight,
difference between present weight and last
memorized weight, BMI/BMI-for-age percentile
together with the evaluation bar. Each screen will
be toggled for 3 seconds. (Fig. 14)
C.
To Fast-Recall Settings from Memory
1. While the power is off, press [▲] or [▼] to toggle
between the memory locations. Press [Set] to
confirm the selected location.
2.
icon will be displayed on screen. The screen
R
displays the height, age and gender on the
toggle screen sequentially after 3 seconds. A
"beep" sounds indicates successful setting.
3. Follow steps 6-7 in the section of To Recall
Settings from Memory.
D.
To Clear Memory
1. Follow steps 1-3 in the section of To Recall
Settings from Memory.
2. If the selected memory is occupied, press both
[▲] or [▼] at the same time to clear the contents
of the selected memory location.
icon will
R
5
AGE 19-99
Fig. 11
R
Fig. 12
M
R
M
R
Fig. 13
AGE 19-99
Fig. 14
HEIGHT
AGE
WEIGHT
LB
BMI
HEIGHT
AGE
WEIGHT
LB
Display for 3 seconds
WEIGHT
LB
Display for 3 seconds
BMI
Display for 3 seconds