HoMedics HEALTH PLUS BPW-040-HP Manual De Instrucciones página 10

1. With the cuff wrapped around your wrist,
press the START/STOP button. Do not
inflate the cuff unless it is wrapped around
your wrist. All digits will light up, checking the
display functions. The checking procedure
will be completed after about 2 seconds.
2. After all symbols disappear, the display
will show "00". The monitor is "Ready to
Measure" and will automatically inflate the
cuff to begin measurement. The cuff will then
begin deflating as measurement continues.
Note:
The monitor will re-inflate automatically if the
system detects that your body requires more
pressure for measurement.
17
3. When the measurement is completed, the
cuff will deflate entirely and systolic pressure,
diastolic pressure and pulse will be shown
simultaneously on the LCD screen. The
measurement is then automatically stored
into memory.
Note:
• This monitor automatically turns off
approximately 1 minute after last operation. You
may also press the START/STOP button to
turn the unit off.
• To interrupt the measurement, you may press
the START/STOP button (recommended), the
MEMORY button or DATE/TIME SET (
buttons. The cuff will deflate immediately after
a button is pressed.
)
18
AVG. 3
ERROR
AVG. 3