Installing The Vulcan Motor Reducer Gear Unit - V2 VULCAN Instrucciones De Uso E Instalación

INSTALLING THE VULCAN MOTOR
REDUCER GEAR UNIT
1. Place the motor reducer gear unit inside the foundation box.
2. Fix the motor reducer in place inside the foundation box by
tightening the 4 nuts.
3. Mount the motor connecting rod on the motor drive shaft and
fix the screw in place using the corresponding self-locking nut.
4. Connect the motor connecting rod to the control rod by
means of the elbow lever.
5. Connect the motor to the control unit, following the
instructions in the following paragraph.
10