Rheem TS100A Manual De Instalación Y Del Operario página 2

Thank you for your purchase of this Rheem/Ruud Automatic Transfer Switch. This product is intended for use with Rheem
and Ruud Home Standby Generator sets ONLY. This is an optional home standby system which provides an alternate source
of electric power and to serve loads such as a gas furnace, refrigeration and communication systems that, when stopped
during any power outage, could cause discomfort, or the like.
This manual contains safety information to make you aware of the hazards and risks associated with transfer switches and
how to avoid them. Rheem has made every effort to provide for a safe, streamlined and cost-effective installation. Each
installation is unique, it is impossible to know of and advise of all conceivable procedures and methods by which installation
might be achieved. We do not know all possible hazards and/or the results of each method or procedure. Save these
instructions for future reference.
This transfer switch requires installation before use. Refer to the Installation section of this manual for instructions on
installation procedures. Only licensed electrical contractors should install transfer switches. Installations must strictly
comply with all applicable federal, state and local codes, standards and regulations.
Where to Find Us
You never have to look far to find support and service for your transfer switch. Consult your Yellow Pages. There are many
Rheem and Ruud authorized service dealers who provide quality service. You can also contact Rheem/Ruud Customer Service
by phone at (877) 369-9400.
Transfer Switch
Model Number
Revision
Serial Number
Date Purchased
Rheem Sales Company
Randleman, NC 27317
(877) 369-9400
Copyright © 2007 Rheem Sales Company. All rights
reserved. No part of this material may be reproduced or
transmitted in any form by any means without the express
written permission of Rheem Sales Company.