Optional Accesories; Features; I New Dsp For High Sensitivity; I Digital Flip - Panasonic WV-CS570 Manual De Instrucciones

FEATURES

This Colour CCTV Camera is a video surveillance
device that incorporates a 1/4-type {1/4"} CCD, a 22x
zoom lens, preset and pan and tilt capabilities in a
dome configuration. It also has the following features.

I New DSP for High Sensitivity

A new noise reduction system lowers minimum illumi-
nance to 1.0 lx {0.1 footcandle} in the colour mode.

I Digital Flip

Normally, a camera needs to stop when it points
straight down during a tilt operation. With digital flip,
however, the camera is able to tilt from 0 ° to 180 ° in a
single motion. This makes it possible to track subjects
passing directly under the camera more smoothly.
Digital Flip Operation
q Tilting w The picture is
downwards flipped when the
camera is pointing
straight down
(at around 135°).
Digital flip is performed only when the system controller joystick is
held downwards.
ACCESSORIES
Operating Instructions (this manual) ...................... 1 pc.
The following items are for installation.
Decorative Cover ................................................... 1 pc.
Dust Protection Sheet ............................................. 1 pc.

OPTIONAL ACCESSORIES

Dome Cover (approx. 60 % transparency, smoked type) .......... WV-CS2SE
Dome Cover (approx. 50 % transparency, smoked type) .......... WV-CS2SHE
Dome Cover (approx. 70 % transparency, metal type) .............. WV-CS2ME
Ceiling Mount Bracket ................................................................. WV-Q105E/WV-Q106E/WV-Q117E
Wall Mount Bracket ..................................................................... WV-Q118E
e Tilting upwards.
-5-

I Privacy Zone Function

The privacy zone function makes it possible to mask
specific areas of the scene from view.

I Patrol Function

The patrol function remembers manual camera move-
ment routines for automatic playback when they are
needed. For example, you can teach the camera the
movements of the people you want to monitor, by
replaying the stored parameters complicated move-
ments are done automatically.

I Camera Position Memory

The system can be configured with up to 32 camera
positions. A particular camera position can be selected
and viewed by entering the applicable preset number
on the system controller 10-key pad.

I Motion Detection

The system can be configured so any motion on the
monitor screen during surveillance causes output of an
alarm signal.
This function can be used to structure a system with a
VTR that records images of nighttime intruders.
8P Alarm Cable ...................................................... 1 pc.
4P Alarm Cable ...................................................... 1 pc.
Connector for 24 V AC (only for WV-CS574E) ....... 1 pc.