Luda Elektronik cowCam lite Guia Del Usuario página 23

Dip switch for looping mode*
Dip switches to lock channels*
Power connection (8V)
AV-out (for TV)**
* Choosing and switching channels
You can set the receiver to either Manual or Looping mode. (Right dip
switch set to either M or L.)
In Looping mode the receiver will automatically switch between the
channels (1, 2, 3, 4) set to ON with the dip switches. In Manual mode
you can switch between the chosen channels manually by pressing the
button on the top of the receiver.
If you only use one camera we recommend that you set the dip switch to the right to M and keep all
channels off except for the one your camera is transmitting on. The receiver will be locked to your
camera channel and will not change channels if somebody for example by mistake presses the button
on top of the receiver.
** AV-out (to cowCam online or TV)
You can connect your receiver either to cowCam Online or a TV with the included AV-cable (yellow/red).
Connect the AV-cable to the AV-receiver and then to the AV-IN socket of your TV. If your TV does not
have an AV-IN socket, use a SCART-converter (is not included but can be found in well-assorted Audio
& Video stores). Turn on your TV and set it to AV-mode to receive the camera picture.
Antenna (2 dBi)
Manual channel selector
Receiver (Art. no. 708)
- 23 -
Channel indicators
DE
EN
ES FI
FR
FI
FR
SV
IT
PL
SV