Winegard MT-SM10 Manual De Ensamblaje, Instalación Y Funcionamiento página 9

Before Traveling
Turn off power to the receiver. Remove power from the antenna.
Maintenance
After the first 1000 miles of operation, verify all nuts and bolts are tight. Verify that the 1/4"-20 bolts securing the antenna to
the mount are still within the torque specifications of 40 in*lbs (minimum), 60 in*lbs (maximum). After the initial 1000 mile
check-up, check on an annual basis. Wipe away any build-up of dirt with some water, a cloth or paper towel, and dish soap.
Before Traveling • Maintenance Page 8