HoMedics AT-PET02 Manual Del Usuario página 7

HOW TO USE
4. Remove the PetPlus Oder filters and set aside.
Make sure the Pre-filter is properly seated on the
grille cover frame.
5. Place the PetPlus Odor Filters into the rear grille
cover, seating them on the rails, with the pull
tabs facing outward at the top of each filter.
6. Place the tabs at the bottom of the grille cover
into the base of the unit. Gently push the grille
cover back into place until you hear a click sound
indicating that the grille cover is firmly latched.
7. Connect the power cord into a standard AC outlet.
NOTE: Unit will not operate unless filters and
grille cover are properly installed.
7