Cleaning The Pre-Filter - HoMedics AT-PET02 Manual Del Usuario

CLEANING THE PRE-FILTER

For best performance vacuum the Pre-Filter once a month
1. Open the rear grille cover by gently pushing down on the
tab on the top of the grille cover
2. Open the cover outward until the tabs at the bottom of
the grille cover easily slide away from the unit.
3. Remove the PetPlus Odor filters and set aside. Remove
the Pre-Filter from the grille cover.
4. Use the brush attachment with your vacuum cleaner.
Run the attachment along both sides of the Pre-Filter,
cleaning it thoroughly.
5. Then place the Pre- Filter back in the grille cover, making
sure it is seated in place on the frame. Place the PetPlus
Odor Filters back into the grille cover, seating them on
the rails with the pull tab facing outward at the top of
each filter.
6. Place the tabs at the bottom of the grille cover into the
base of the unit. Gently push the grille cover back into
place until you hear a click sound indicating that the
grille cover is firmly latched.
CAUTION: DO NOT WASH ANY OF THE FILTERS. DO NOT
IMMERSE IN WATER.
9