Outline Diagram - Nibe HPAC 40 Manual De Instalación

Pressure drop diagram
for HPAC 40 (25 % propylene glycol, 5 °C)
Tryckfall
kPa
30,0
25,0
20,0
15,0
10,0
5,0
0,0
0 0,1 0,2 0,3 0,4
A: Passiv kyla
B: Aktiv kyla, köldbärarkrets
C: Värme, köldbärarkrets
D: Aktiv kyla, värmebärarkrets
E: Värme, värmebärarkrets
A
B
C
D
E
Flöde
0,5 0,6 0,7 0,8 l/s

Outline diagram

General
In cases where the system volume in the climate system
is below20 l/kW (heat pump output at 7/45 °C) and/or
the flow in the climate system is choked uncontrolled, a
UKV tank is installed as a volume and flow increaser.
Explanation
EB100 Heat pump system
BT1 Temperature sensor, outdoor
BT6 Temperature sensor, hot water charging
BT25 Temperature sensor, heating medium flow,
External
EB100 Heat pump, F1145/F1245
HQ1 Particle filter
EQ1 HPAC 40
BT25 Temperature sensor, heating medium flow,
External
Miscellane-
ous
BP6 Manometer, brine side
CP10 Accumulator tank with hot water coil
CP20 Buffer vessel (UKV)
CM1 Expansion vessel, closed, heating medium
side
CM3 Expansion vessel, closed, brine side
EP12 Collector, brine side
FL2 Safety valve, heating medium side
FL3 Safety valve, brine
GP13 Circulation pump, heating medium external
QM12 Filler valve, brine
QM21 Venting valve, brine side
QM31 Shut-off valve, heating medium flow
QM32 Shut off valve, heating medium return
QM34 Shut off valve, brine return
XL15 Filling set, brine
Designations according to standards 81346-1 and 81346-
2.
GB
21