Winner M532-34 Manual De Empleo página 31

Transmitter Introduction
Front, Side & Back Panel
16.
17.
18.
19.
20.
Ⅰ → Press this key around 3 sec to turn on/off the 2.4GHz RF transmission function
Ⅱ → When the included power adaptor is connected, press this button to switch
Ⅲ → When the 2.4GHz LED is lighting, hold this key for 3~5 seconds to shut down
the 2.4GHz RF transmission.
21.
22. AV Input Port︰This allows COMPOSITE signal input.
23. Power Input Port︰Connect the included power adaptor to this port.
24.
25. Audio Stereo Output Port︰Stereo audio output. Same with TV1's sound output.
26. IR Transmitter Port︰
Connect the included IR transmitter to this port. This allows the IR transmitter
to control all devices that are connected to the transmitter unit via IR sensor
and 433 MHz frequency.
Note︰Make sure the IR transmitter is facing the IR sensor of all signal sources.
2.4GHz LED︰Shows ON/OFF status of the 2.4GHz RF transmission function.
IR Sensor︰Receiving IR signal from the remote controller.
Source LED︰source indicator.
VCR Source Key︰Press this key to change between input sources on VCR.
TV1 Source Key︰
between input sources on TV1.
UHF Antenna
2.4GHz Integrated Antenna