Tracks; Track Tension; Rollers And Track Idler; Seat - Lander 55 Manejo Y Cuidado

5.5 TRACKS

5.5.1 Track tension

The track should have a top bow, without rollers, of 30-40mm and 12-20mm if
the rollers are mounted (fig.10). Check this every 150 hours. To regulate track
tension, remove plug F fig.10 and, with a grease gun, it is advisable to use add
AGIP GREASE LP2 until the correct bow parameter is reached.
Do not add too much grease. If you do, remove casing D. fig.10 and remove the
grease nipple mount to allow the excess grease to come out.
Every 30 hours grease points B fig.10 and points A fig.11.

5.5.2 Rollers and track idler

The bottom rollers C fig.10 and the track idler A fig.10, are life-lubricated and do
not require maintenance. Check for leaks. If you note leaks, disassemble them
and check the seals.
If lubrication is required, it is advisable to use AGIP SUPER TRACTOR
UNIVERSAL SAE 15W/40 oil.
Every 30 hours grease the top roller (optional).

5.6 SEAT

As needed, regulate seat distance (using lever n.18 fig.1). Knob n.19 fig.1, is
used to regulate seat comfort parameters.
53