Technical Data - Poulan PD4016 Guia De Inicio Rapido

The computed kickback angle (CKA) listed on your saw and listed in the CKA table below represents angle of kickback your bar
and chain combinations will have when tested in accordance with CSA (Canadian Standards Association) and ANSI standards.
When purchasing replacement bar and chain, considerations should be given to the lower CKA values. Lower CKA values
represent safer angles to the user, higher values indicate more angle and higher kick energies. Computed angles represented
indicate total energy and angle associated without activation of the chain brake during kickback. Activated angle represents chain
stopping time relative to activation angle of chain break and resulting kick angle of saw. In all cases lower CKA values represent a
safer operating environment for the user.
The following guide bar and chain combinations meet kickback requirements of CSA Standards Z62.1, Z62.3, & ANSI B175.1
when used on saws listed in this manual. Use of bar and chain combinations other than those listed is not recommended and
may not meet the CKA requirements per standard.
Model
PD4016
PD4218
Type In
UC83G 0,375

TECHNICAL DATA

Guide Bar
P/N
530044906
580897801
In (mm) In (mm)
0,050 (1,3) 5/32 (4,0)
Length (in/cm)
16/40
18/45
° °
85° 30°
15
Chain CKA without chain
UC83G 56DL
UC83G 62DL
° In (mm)
0° 0,025 (0,65)
brake
45°
45°
In (mm) : dl
16 (40) : 56
18 (45) : 62