Unpacking; Disposal Of The Packaging - Caso MCDG 25 Master Manual De Instrucciones

11.3 Unpacking

To unpack the device, proceed as follows:
•
Remove the device out of the carton and remove the packaging
material.
•
Open the door of the device and remove the internal protective film from
the door.
•
Remove the accessories located in the cooking chamber and remove
the packaging material.
•
Remove the red coloured safety adhesive strip on the floor of the
cooking chamber.
•
Do not remove the film on the oven ventilation opening!
•
Remove the blue protective film on the device itself.
►

11.4 Disposal of the packaging

The packaging protects the device against damages during transit. The
packaging materials are selected in accordance with environmentally
compatible and recycling-related points of view and can therefore be
recycled.
Returning the packaging back to the material loop saves raw materials
and reduces the quantities of accumulated waste. Take any packaging
materials that are no longer required to "Green Dot" recycling collection
points for disposal.
►
caso MCDG 25 Master
Please note
Only remove the blue protective film shortly before setting up the
device in the location where it will be used, to prevent scratches and
dirt accumulations.
Please note
If possible, keep the original packaging for the device for the duration
of the guarantee period of the device, in order that the device can be
re-packaged properly in the event of a guarantee claim.
53