Connections - Denon DN-C615 Instrucciones De Operación

@1
TITLE button
• When the button is pressed, the text
information (Disc title, track title, disc artist or
track artits) is displayed.
• When the button is pressed while in the stop
mode with a disc containing an MP3 ID3-Tag
loaded, the file name is displayed.
pressed during playback, the display switches
as shown below.
Elapsed time of currently playing track
File name of currently playing track
Title name
Artist name
Album name
@2
FOLDER button
• When disc containing MP3 format files is
loaded, in the stop mode press this button then
the folder select mode is possible.
@3
Headphones jack
• For private listening, you can connect your
headphones to this jack.
(2) Rear panel
q
ANALOG OUT jacks
• These are unbalanced outputs using RCA type
jacks.
The CD's playback signals are output from
these jacks.
w
DIGITAL OUT jack
• This is an coaxial output using an RCA type
jack.
• Signal format : SPDIF or IEC-958 Type II
e
External synchronized control jacks
(EXT. SYNC.)
• Connect these for synchronized recording.
r Cascade control jacks (CASCADE)
• Connect these for continuous operation on
multiple units.
• When the cascade mode is set to "ON", the
start signal is output from this output jack once
operation is finished. (Preset function)
t
RC IN control jack
• This is a stereo mini jack for wired remote
control.
(3) Display
q
CD transport indicator
w
Mode display portion (CD)
FILE : This lights when the file name of
When MP3 is displayed.
FOLDER : This lights in the folder selection
mode.
TITLE : This lights when the title in the MP3
ID3-Tag or CD Text is displayed.
MP3 : This lights when a disc containing
MP3 format file is loaded.
PROG : This lights in the program mode.
RAND : This lights in the random mode.
REPEAT, 1 : This lights in the repeat mode.
CASCADE : This lights in the cascade mode.
(Preset function)
ALBUM : This lights when the album name in
the MP3 ID3-Tag is displayed.
ARTIST : This lights when the artist name in
the MP3 ID3-Tag is displayed.
e
CD pitch display
r
Playing position display
• This indicates the current position within the
track's totalplaying time.
• In the MP3 play mode, it may be unable to
display correctly.
t
20 tracks music calender
• In the single track play mode, only the specified
track lights.
• In the continuous play mode, everything from
the specified track to the last track lights.
• Track numbers are displayed up to track 20.
Track 21 and on are not displayed.
• MP3 is not displayed.
y
Multiple display
• This displays Track No. of CD, playing time of
CD, various operational information, text
message, etc.
u
Time mode indicator
ELAPSED : This lights when the elapsed time is
displayed.
REMAIN : This lights when the remaining time is
displayed.
i
Infrared remote control indicator
o
Play mode indicators
• "SINGLE" lights when in the single track play
mode.
• "CONT." lights when in the continuous play
mode.

CONNECTIONS

3
Leave your entire system (including the DN-C615) turned off until all connections between the DN-C615 and
other components have been completed.
2 Connection precautions
• Before proceeding with connections or disconnections of cables and power cords, be sure to turn all
system components off.
• Ensure that all cables are connected properly to the L (left) and R (right) jacks.
• Insert plugs fully into the terminals.
• Connect the CD output jacks to the amplifier CD or AUX input jacks.
2 Remote control connections (RC IN)
• For wired remote control, use the circuit shown on the diagram below.
• Design the circuit so that the wire resistance is 0.5 Ω/ohms or less.
C1
Lch
150 180 270 390
N N N N
C2
Rch
150 180 270 390
N N N N
GND
C3
• Up to six units can be controlled simultaneously
with one remote control unit.
• Wire the signal and ground lines as shown on the
diagram below and connect at the remote control
inputs (C1, C2 and C3).
• Design the circuit so that the resistance of the
individual wires is 0.5 Ω/ohms or less.
2 Installation precautions
• If the DN-C615 is placed near an amplifier, tuner or other components, noise (induced hum) or beat
interference may result (especially during AM or FM reception).
If this occurs, separate the DN-C615 from other components or reorient its position.
NOTE:
• Use this unit in a horizontal orientation.
When the unit is used with the front panel facing upward (and the unit us in a vertical orientation) or when
the front panel is on an incline, the unit will not operate properly.
1 N 6
("N" is the number of DN-C615
680
N
units connected.)
680 1.3k 3.9k
N N N
Rch
G R L
ø3.5mm
Lch
GND
Stereo mini plug
Connecting two DN-C615 units (N = 2)
Remote Unit
C1 C2 C3
DN-C615 DN-C615
1 2
ENGLISH
7