Harman JBL TOWER X MARINE SPEAKER Guia De Instalacion página 6

Attaching the safety strap
To keep the speaker from falling when adjusting it, use the included safety strap. Wrap the loop around the horizontal bar
of the wake tower, then secure the strap to the speaker by threading the included hex screw through the strap's ring, and
screwing it into the hole on the side of the mounting sleeve.
Protecting your speaker from the elements
When not in use, you can protect your speaker using the included neoprene bag. Slide the bag over the speaker, and close
the zipper to secure in place. You can use the bag whether the speaker is mounted or unmounted.
Specifications
Continuous power handling
Peak power handling
Frequency response
Nominal impedance
Sensitivity @ 2.83V
Tweeter
Voice coil diameter
Adjustable bar diameter
EN
6.5" (165mm)
100 watts RMS
50 Hz – 20 kHz
1" titanium horn
1-1/2" (38.5mm)
1-3/4" (44.5mm) – 3" (76.2mm)
HARMAN International Industries,
Incorporated 8500 Balboa Boulevard,
Northridge, CA 91329 USA
www.jbl.com
Wrap around tower bar
300 watts
4 ohms
90 dB
© 2018 HARMAN International Industries, Incorporated. All rights reserved.
JBL is a trademark of HARMAN International Industries, Incorporated,
registered in the United States and/or other countries. Features, specifications
and appearance are subject to change without notice.
8" (200mm)
150 watts RMS
450 watts
40 Hz – 20 kHz
4 ohms
92 dB
1" titanium horn
1-1/2" (38.5mm)
1-3/4" (44.5mm) – 3" (76.2mm)
4