Base Plate - Holmatro RA 5311 CL Manual De Instrucciones

Description Pos
grip head
pulling chains
pulling shoes
accessory kit
pulling chains
RIM adapter set
accessory kit
3.6.2 Ram head
Two ram heads are delivered by default with every ram jack. Extra ram heads can be ordered if desired.
3.6.3 Grip head with laser
A grip head with laser allows to highlight the area where the grip head may contact the vehicle. A grip
head with laser can only be placed on the plunger side of the tool.
WARNING
Do not look into the laser beam.
(Class 2 laser product according to DIN EN 60825-1 : 2008-05 l=650 nm P0<0.75 mW)
3.6.4 Ram support
The ram support is an accessory used for bodywork in an unstable condition. It provides a safe push-off
point to prevent slipping. The ram support has three push-off points and can be used in combination
with every ram jack. The push-off points are recognizable as round bars on which the ram head can be
placed.
3.6.5 Conical tip
The conical tip has a sharp point and can be used to make a hole in a plate. It can be placed on the end
of the plunger and/or fixed side, instead of the ram head.
3.6.6 Wedge piece
The wedge piece has a sharp V-shape and can be used as a chisel to cut sections of bodywork or as a
push-off point in corners where the standard ram head will not fit. It can be placed on the end of the
plunger and/or fixed side, instead of the ram head.
3.6.7

Base plate

The base plate has a larger pressure area than the standard ram heads and is therefore suitable for use
on soft bases. It must be placed on the end of the plunger and/or fixed side, instead of the ram head.
Make sure that the load is always held right in the middle of the opposite ram head.
RA/TR 53**
Model
N set of 2
O laser pointer
P basic (1 grip head)
Q base side (1 grip
head)
R set of chains
S
T AS 4300 A
U in case
V in case
W AS 4300 B
151.000.596
150.014.062
150.182.333
150.014.668
151.000.265
150.007.279
150.582.152
150.582.281
150.182.269
150.582.021
150.182.580
150.182.296
916.400.010_005
x x x
x x x
x x x
x x x
x x x
x x
x x x
x x x
x x x
EN
x
x x x
x x
x
x
x
x
x
x
x
39