Unit Descriptions - BK Precision 875B Manual De Instrucciones

1.3 Unit Description
Please use the dr awings of the 87 5B, in co njunction with the
following descriptions of the con trols and co nnections to help
familiarize you with the unit:
(1) Liquid Crystal Display
(2) LCR/D Mode Switch
(3) Function/Range Switch : Selects the function and ra nge for
(4) Common Terminal Slot : The ne gative ( common) te st
(5) Positive Terminal Slot
(6) Common Terminal Jack : The negative (low) banana jack for
(7) Positive Terminal Jack
(8) Battery Compartment
(9) Tilt Stand
(10) Zero Adjust
(11) Power Switch
: Indicates the value of capacitance
connected to the test inputs.
: Selects either LCR or Dissipation
Factor measurement mode.
the desired measurement.
connector for all measurements.
: The positive (high) test connector
for all measurements.
measurements r equiring t he us e
of te st leads.
: The positive (high) banana jack for
measurements requiring the use
of te st leads.
: Access for the battery.
: Used to hold the instrument at an
angle on a level surface, or when
reversed to han g it from a
projection.
: Control used to zero the display.
: Turns power to t he instrument on
and off.
2