Apex XT Fit Manual De Usuario página 9

XT Fit /English
3. Installation
3.1 Unpacking
To secure its contents inside, the CPAP device and accessories are bundled in a paper-packaged box. Unpack this
box by removing the CPAP and its accessory and checking for any damage, which may have occurred during
shipping. If there are damages, please contact your dealer immediately.
3.2 Setting Up
1) Connect the power cord to CPAP device and plug into
main electrical outlet.
Once the power cord is plugged into the electrical
outlet, the device is in ready to operate position
("STANDBY" sign appears in LCD display)
NOTE: The plug is also served to disconnect the
device.
2) Connect one end of the air tubing firmly to the air outlet
of the CPAP.
3) Connect the other end of the air tubing to the mask
system. Putting on the mask and headgear according
to the mask instruction manual.
6