Station Pre-Set Memory - Phase Linear UMP301 Manual Del Usario

OPERATING INSTRUCTIONS
Loudness Control (LOUD)
10
When listening to music at low volume levels,
this feature will boost the bass and treble
ranges to compensate for the characteristics of
human hearing. Press and hold the LOUD
button (10) to activate this feature as indicated
by a beep tone and "LOUD ON" appearing on
the display panel. ("LOUD" remains on the
display.) Press and hold the button again to turn
the Loud function off. "LOUD" will disappear.
Display Selector (DISP)
11
This unit can display either the clock time or
radio frequency/CD player functions. Press the
DISP button (11) to display the time for
approximately 5 seconds. The correct time-of-
day can be set by pressing and holding the
DISP button.
Setting the Clock
To set the clock, perform the following steps:
1. Press the DISP button (11) to display the
clock.
2. Press and hold the DISP button (11) until the
time display flashes.
3. Within 5 seconds, press the volume – button
(3) to adjust the minutes to the desired set-
ting.
4. Press the volume + button (3) to adjust the
hour and the AM/PM indication to the
desired time.
5. Press the DISP button again to return to
radio frequency.
–

Station Pre-Set Memory

14 19
To set any of the 6 pre-set memory buttons ,
use the following procedure:
1. Turn the unit on and select the desired band.
2. Select the first station to be pre-set using the
tune/track buttons (6a and 6b).
3. Press and hold a preset button until you
hear a confirmation tone. The preset number
appears on the display panel. The station is
MUTE
UMP301 CD / MP3 / WMA / RECEIVER
SRC SRC
3
SEL SEL
DISP AS/PS
4 11 8
10
now stored and can be recalled at any time
by pressing the correct preset button.
4. Repeat the above procedure for the remain-
ing 5 presets for the current band. Six sta-
tions can be stored for each band.
12
ALBUM
MUSIC
ARTIST
INTRO REPEAT RANDOM
1 2 3 4 5 6
14 15 16 18
17 19
UMP301
6a
20
5
BAND
10
ST/MO LO/DX
LOUD
7 9 6b