Pty Search; Using Preset Stations - Jensen VM9313 Manual De Instrucciones De Instalación Y Operación

VM9313
Direct Tuning
To enter a radio station directly, touch the
press the GOTO button (21) on the remote control to display
the direct entry menu.
FM: _ _ _ . _ MHz
1 2 3
Exit
4 5 6
7 8 9
0
Clear
Enter the desired radio station using the on-screen number
pad. Press the enter button (arrow) to tune to the selected
station. To exit the screen without changing the station, touch
Exit. To clear your entry and start over, touch Clear.
HD Radio Multicast Channels
To tune to an HD Radio multicast channel, tune to the main
signal and then press the PROG button (20) on page 2/2. If a
Multicast channel is being broadcast for the current station,
the corresponding multicasting number appears on the left
side of the screen. To view the title and artist, if available,
select HD-1, HD-2, HD3, etc.
FM 106.7 MHz
RADIO RADIO
WXXL-FM
Auto HD
E
HD-1
Q
HD-2
HD-3
PROG
Info: Lil Love
NOTE: The amount of information displayed when
button or
receiving an HD Radio signal is dependent upon what is
being broadcast. Some stations broadcast their call
letters (name), the artist's name, song title, and category
of music.

PTY Search

After tuning to an HD Radio channel, the Program Type
categories are listed, allowing listeners to find similar
programming by genre.
FM
RADIO RADIO
WXXL-FM
E
01 Non-specific
Q
02 News
03 Information
04 Sports
05 Talk
06 Rock
Info: DAWSON McALLIST
If the PTY menu is not displayed, press the PROG button
(20) on page 2/2 to toggle between HD Radio multicast
channels and PTY categories.
When a PTY category is selected from the touch screen
02:27 AM
menu, the radio will start scanning for stations broadcasting
in the selected category.

Using Preset Stations

You can store up to 18 presets for FM and 6 presets for AM.
Stored stations appear on the left side of the screen.
Storing a Station
1. Select a band (if needed), then select a station.
A/D
2/2
02:07 AM
106.7 MHz
Auto HD
PROG 2/2 A/D
14
2. Touch the on-screen MEM button (17) to open the
preset screen.
Preset: _ _
1 2
3
Exit
6
4 5
9
7 8
0 Clear
3. Enter the preset number for which you would like to
store the current station (or press EXIT to cancel and
close the menu). The preset number and station
appears highlighted on the left side of the screen.
NOTE: Multicast stations can be stored as preset
stations.
Recalling a Station
1. Select a band (if needed).
2. Touch an on-screen preset button (6) to select the
corresponding stored station.
P1 87.5 MHz
P2 90.1 MHz
P3 98.1 MHz
P4 106.1 MHz
P5 107.9 MHz
P6 102.9 MHz
Auto Store (AS)
To select 18 strong FM or 6 AM stations and store them in
the current band:
1. Select a band (if needed).
2. Press and hold the PIC/BAND button (3) on the control
panel for 2 seconds to activate the Auto Store function.
The new stations replace stations already stored in that band.